The Synocular eye tracker
The Synocular eye tracker: a sensor bar that sits below your display, with its tripod and cabling, and the Windows software for recording and analysis.
Pre-production hardware, planned for spring 2027. Not yet available to buy or evaluate. Registering interest is non-binding and needs no payment.

Synocular V5 production design.
What you get
Each tracker is tested before it is supplied, and arrives ready to plug in.

Sensor bar
A near-infrared camera and six 850 nm LEDs behind an IR-pass window. The V5 design uses a 10 mm lens and side-exit USB-C.

Desk tripod
With a tilt head. The bar screws onto its 1/4-20 thread.

Windows software
Synocular, Synocular Analysis, the free SDK and the documentation.
The hardware images show the Synocular V5 production design. The software image is a screenshot.
On a tripod or below the display
The bar screws onto the desk tripod, or hangs below the monitor on the VESA mount, which uses the 100 × 100 mm holes on the back of most monitors. The bracket bolts into two recessed rear M5 nuts. Two side knobs lock the tracker at the chosen tilt, from 15° to 40°.


Synocular V5 production design. Drag to rotate the view, or use the tilt controls to angle the tracker.
Key specifications
| Tracking | Both eyes, pupil–corneal reflection; per-eye and combined gaze |
| Sample rate | 60 Hz |
| Operating distance | 55–75 cm from the tracker, which sits just below the screen; no headrest or chin rest |
| Calibration | Nine or sixteen points, with a separate validation set |
| Data | Live gaze stream; recorded sessions, analysed in Synocular Analysis or exported to BIDS, EyeLink ASC and Tobii TSV |
| Illumination | 850 nm, calculated to be within the IEC 62471 exempt group at the 200 mm design minimum; independent assessment planned before supply |
Synocular is supplied on a business-to-business basis, for research and development use. See Intended use & safety.